Section 1 - Product Overview
DHP-502AV Hardware Overview
LEDs
|
| • Solid - Indicates that the device is receiving electrical power. | |
1 | Power LED | • Blinking - Indicates that the device is setting itself up after reset or when | |
the security button was pressed or power saving mode enabled. | |||
|
| ||
|
| • Off - The device is not receiving electrical power. | |
|
|
| |
|
| • Solid - The device is connected to a PowerLine network. | |
|
| • Blinking - The device is transmitting data. | |
|
| • Off - The device has not found any other compatible PowerLine devices | |
2 | PowerLine LED | using the same encryption key. | |
The color indicates the PowerLine link rate: | |||
|
|
•Green - The PowerLine link rate is faster than 80 Mbps.
•Amber - The PowerLine link rate is between 50 Mbps and 80 Mbps.
•Red - The PowerLine link rate is less than 50 Mbps.
•Solid - The Ethernet port is linked but there is no data traffic.
3Ethernet LED • Blinking - The device is transmitting data.
•Off - There is no Ethernet connection.
1 
2
3 
6 |
