Double-click on Network | D-Link DI-514 specs

Troubleshooting

•Double-click on Network

Adapters

•Right-click on D-Link

AirPlus DWL-650 Wireless Cardbus Adapter

•Select Properties to check that the drivers are installed properly

•Look under Device Status to check that the device is working properly.

•Click OK

D-Link Air DWL-650 Wireless Cardbus Adapter

D-Link AirPlus DWL-650+ Wireless Cardbus Adapter

D-Link AirPlus DWL-650 Wireless Cardbus Adapter

38

Image 38

D-Link DI-514 manual Double-click on Network

Contents

Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Link AirPlus DWL-800AP+ Wireless BasicsLink Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+ Link AirPlus DWL-810+ Installation Considerations Link Air DWL-520 Getting StartedLink Air DWL-650 Setting Up an Infrastructure Network Getting Started Setup Wizard Using the Configuration MenuType admin in the User Name field lower case Home Wizard Home WirelessWireless Channel Key Type Home WAN Dynamic IP Address Secondary DNS Address optional PPPoE Home LAN Home Dhcp Dhcp Advanced Virtual Server Virtual ServerPage Advanced Applications Advanced Filters Filters MAC Filters Advanced Firewall Domain Blocking Advanced DMZ Advanced Performance Tools Admin Authentication Select Open system, Shared Key or Auto Time System SettingsTools System Tools Firmware Tools Misc Status Device Info Log Settings Status Log Status Stats Status WirelessConnected Wireless Clients List Traffic Statistics Troubleshooting Configure the DI-514 Access Point Troubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking Basics Networking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Computer Name Tab in the System Properties window Windows XPRight-click on My Computer Select Properties and click Click Change… Select Workgroup and enter the name of the Workgroup Area Connection icon in the task bar Support Tab Double-click on Control Panel Assigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Input the Static IP Address, Subnet Mask and the Router IP PreferencesSelect Built-in Ethernet Click Apply Now System Preferences Select Built-in Ethernet in the Show pull-down menu For Windows XP For Windows ME and 98SE Standards Technical SpecificationsEncryption 64/128 bit RC4 Media Access Control VPN Pass Through / Multi-Sessions Power Input Wireless Transmit Power 15dBm ± 2dB External Antenna TypeOperating Temperature 32F to 131F 0C to 55C Humidity Safety & Emissions Technical Support Technical Support Warranty USA only Page Important Note Page Registration