Using the Configuration Menu | |
|
|
Packet Types: The types of the ICMP packets that could be blocked.
System Restart
System Restart: The link to the page to restart system.
DNS Loopback
DNS Loopback: If there is any domain in your private network. You can setup the mapping table of Domain Name & Private IP for DNS query.
Interface Binding
SMTP Binding: To determine if the SMTP packets are bound on the WAN port.
SMTP Binding To specify the WAN port that your SMTP traffic is only transmitted
Port: on. It could be that you have two accounts from two different ISP. It is best to use only one.
IP Sec/PPTP: Enable this to allow UPN connections from PCs on the LAN to senders.
Set Protocol & Port Binding
Set Protocol & Port To determine if the SMTP packets are bound on the WAN port.
Binding:
Protocol & Port Binding |
| ||
Protocol & Port |
|
| It is very like SMTP binding, but you must setup extra data like |
| |||
Binding: |
|
| Protocol & Port Range. If all the checking items are met, the packet |
|
|
| will be bound on the specified WAN port. |
Enable: |
|
| To activate or deactivate current rule. |
Source IP: |
|
| The IP address that the packet’s source IP will be checked |
|
|
| against. |
Dest. IP / IP |
|
| The specific IP range that the packet’s destination IP will be checked |
Address: |
|
| against. There are two forms of Dest. IP: If Subnet is selected, the |
|
|
| fields IP Address and Subnet Mask need to be filled. If IP Range |
|
|
| is selected, the fields From and To need to be filled. |
Protocol: |
|
| The protocol that the packet’s protocol will be checked against. |
Port Range: |
|
| The specific port number range that the packet’s destination port |
|
|
| number will be checked against. |
WAN: |
|
| The specific WAN port that the packet will be bound on if all the |
|
|
| checking items are met. |
Back |
|
|
|
Back: |
|
| The link to the main page of Advanced Feature. |
|
|
|
|
40 | |||
