Manuals / D-Link / Computer Equipment / Network Router

D-Link DI-LB604 manual Connection Mode Static IP Dynamic IP PPPoE PPTP Connection Backup of

Models: DI-LB604

1 92

Page 12

DI-LB604 User’s Manual	Using the Conﬁguration Menu

WAN

Connection

Connection Mode:

Static IP:

Dynamic IP:

PPPoE:

PPTP Connection:

Backup of:

Home > WAN

There are three connection modes for each WAN port, Enable, Disable and Backup. Set to Disable if there is no modem connected to the WAN port. If both WAN ports are used, one is set to Enable and the other is set to Backup, the backup line will automatically be used when the other line is disconnected.

Select this if you want to specify a ﬁxed IP address for the WAN port.

Select this if you want the WAN port to get its IP address from a DHCP server.

Select this if you want the WAN port to get its IP address from a PPPoE server.

To enable or disable PPTP connection on the WAN port.

To indicate which WAN port to be the backup of current port.

D-Link Systems, Inc.

Page 12

Image 12

D-Link DI-LB604 manual Connection Mode Static IP Dynamic IP PPPoE PPTP Connection Backup of, Home WAN

Contents

Page Table of Contents Setting Static DHCPPackage Contents Features and BeneﬁtsLog Settings TroubleshootingFrequently Asked Questions WarrantyPackage Contents Minimum System RequirementsNote Using a power supply with a different Introduction IntroductionFeatures and Beneﬁts Features and BeneﬁtsHardware Overview ConnectionsPower Receptor LAN Ports Reset ButtonLEDs Power LEDWAN LEDs Status LEDGetting Started Getting StartedUsing the Conﬁguration Menu Using the Conﬁguration MenuHome WizardHome Wizard Connection Mode Static IP Dynamic IP PPPoE PPTP Connection Backup of ConnectionHome WAN Username Password Address InformationAddress Information PPTP DialupPort Options Home WAN Port OptionsWAN Port Select the WAN port that you would like these port options toMethod IntervalPPPoE / PPTP Connection Disconnect AfterDHCP LAN SettingsIP Address Subnet Mask DHCP ServerDHCP Client List View DHCP List Setting Static DHCPLease Time DHCP Client List HelpSetting Static DHCP Home DHCP Setting Static DHCPStatic DHCP Host Name MAC Address Reserved IP AddressLoad Balance Load Balance Enable Load Balance Base on Loading ShareHome Load Balance Load Balance ConﬁgurationAdvanced Host IPHost IP Host IPHost Network binding Strict Binding Loose BindingHost & Group List Host & Group ListStatic Routing Static RoutingStatic Routing Network Address Netmask Gateway Interface Metric Advanced Static RoutingVirtual Server Virtual Server Enable Server Name Private IP Protocol TypeVirtual Server Private Port Range Interface BindingApplications Special Application Conﬁguration Enable NamePublic Port Range Advanced ApplicationsMulti-DMZ EnableSpecial Application List Multi DMZFilters WAN Name PPPoE Sess Private IP LAN Access Group DirectionAccess Filters Access FiltersBlock All Access Block Selected Items Enable Name Protocol Type Port No. RangeSelect One Group No Filtering ICMP FiltersQoS Setup Enable QoS Queuing Method Process TOS FieldAdvanced QoS QoS Set Policy Advanced QoS Set PolicyQoS Policy Policy Name Local/Remote Address Protocol TypeNAT Routing TCP Timeout UDP Timeout TCP Window Limit TCP MSS Limit Advanced NatNAT Conﬁguration Set NAT Alias NAT Alias Enable Local Lan IP Wan IP Protocol WAN Back NAT Port OptionsPort Range Non-Port Translation Set NAT AliasAdmin ToolsTools Admin This administrator password protects the conﬁguration for thisTime SystemUsing the Conﬁguration Menu NTP ConﬁgurationFirmware System SettingSave Settings To Local Hard Drive Load SettingsEmail Alert Global Settings Notiﬁcation onPassword Tools Email AlertSNMP Recipient Address Send Test E-mailTools SNMP SNMP Simple Network Management ProtocolDDNS Service Server Name User Name Password Verify Password Domain NameAdditional Settings Enable WildcardUPnP Mail ExchangerWAN Port Binding WAN Port BindingMisc Tools MiscExternal Filters Conﬁguration IDENT PortEnable System RestartDNS Loopback Interface BindingStatus Device InfoDevice Information Device InformationLog Settings Using the Conﬁguration MenuStatus Log Log Settings View LogSyslog Delivery Sending Out Keep Sent Messages Syslog ServersLog Priority for Modules Message StatusStats RefreshRefresh Restart CountersInterface Statistics Interface Statistics Load Share Overall StatisticsNAT Status NAT TimeoutsUsing the Conﬁguration Menu NAT StatusNAT Connection List TCP Property NAT Trafﬁc Connections Errors MiscStatus Statistics NAT Status View Connection List Troubleshooting TroubleshootingResetting the DI-LB604 to Factory Default Settings Technical Speciﬁcations Advanced Firewall FeaturesOperating Temperature Safety and EmissionsPower Input  Ext. Power Supply DC 5V, 3AWeight WarrantyFrequently Asked Questions 1 Why can’t I access the Web-based conﬁguration?How to tell straight-through cable from a crossover cable Page DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual  Click Specify an IP Address Frequently Asked Questions DI-LB604 User’s Manual Click on the DNS Conﬁguration tab  Click OK twice Right-click on My Network Places and select Properties  Highlight Internet Protocol TCP/IP and click Properties2 How can I setup my router to work with a Cable modem connection? DI-LB604 User’s Manual Static Cable Connection 3 How can I setup my router to work with DSL or any PPPoE connection? DI-LB604 User’s Manual 5 How do I open ports on my router? To set up your routerStep 9 Click Apply and then click Continue 6 What is DMZ? 7 How do I conﬁgure the DMZ Host?Demilitarized Zone DI-LB604 User’s Manual 8 How do I open a range of ports on my DI-LB604 using Firewall rules? Step 7 Click Apply and then click Continue10 How do I use PC Anywhere with my DI-LB604 router? 9 What are virtual servers?Enable Server PortDI-LB604 User’s Manual Step 4 The ﬁrst entry will read as shown aboveStep 5 Click Apply and then click Continue Step 6 Create a second entry as shown below11 How can I use eDonkey behind my D-Link Router? Step 7 Click Apply and then click ContinueStep 2 Click on Advanced and then click Firewall Step 4 Click Apply and then Continue 12 How do I configure my router for KaZaA and Grokster? 13 How do I conﬁgure my router to play Warcraft 3? Step 2 Click on Advanced and then click Virtual Server15 What is NAT? 14 How do I use NetMeeting with my D-Link Router?Conﬁgure the Game Port information on each computer Appendix Securing Your Network1. Change Admin Password 2. Change your SSID 3. Enable WEP and WPAGlossary AppendixCarrier Sense Multiple Access/Collision Avoidance - CSMA/CA Carrier Sense Multiple Access/Collision Detect - CSMA/CDAppendix Appendix Appendix Appendix Megabyte - MB Megabits per second - MbpsAppendix Appendix Appendix Virtual LANContacting Technical Support Tech Support for customers within the United StatesD-Link Technical Support over the Telephone 877 Tech Support for customers within CanadaWarranty Getting StartedWarranty Warranty · Reorient or relocate the receiving antennaWarranty FCC CautionIMPORTANT NOTE FCC Radiation Exposure Statement Registration Registration