Manuals / D-Link / Computer Equipment / Network Router

D-Link DI-LB604 manual How can I setup my router to work with DSL or any PPPoE connection?

Models: DI-LB604

1 92

Download 92 pages 42.25 Kb

Page 64

3 How can I setup my router to work with DSL or any PPPoE connection?

DI-LB604 User’s Manual	Frequently Asked Questions

3 How can I setup my router to work with DSL or any PPPoE connection?

Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet.

Step 1: Upgrade Firmware if needed.

(Please visit the D-Link tech support website at: http://support.dlink.com for the latest ﬁrmware upgrade information.)

Step 2: Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights will blink, and then stabilize.

Step 3: After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK.

If the password dialog box does not come up repeat Step 2. Note: Do not run Wizard.

Step 4: Click on the WAN tab on left-hand side of the screen. Select PPPoE.

Step 5: Select Dynamic PPPoE (unless your ISP supplied you with a static IP Address).

Step 6: In the username ﬁeld enter ELN/username@earthlink.net and your password, where username is your own username.

For SBC Global users, enter username@sbcglobal.net. For Ameritech users, enter username@ameritech.net. For BellSouth users, enter username@bellsouth.net.

For Mindspring users, enter username@mindspring.com. For most other ISPs, enter username.

Step 7: Maximum Idle Time should be set to zero. Set MTU to 1492, unless speciﬁed by your ISP, and set Autoreconnect to Enabled.

Note: If you experience problems accessing certain websites and/or email issues, please set the MTU to a lower number such as 1472, 1452, etc. Contact your ISP for more information and the proper MTU setting for your connection.

Step 8: Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the D-Link router.

D-Link Systems, Inc.

64

Image 64

D-Link DI-LB604 manual How can I setup my router to work with DSL or any PPPoE connection?

Contents

Page Table of Contents Setting Static DHCPPackage Contents Features and BeneﬁtsLog Settings TroubleshootingFrequently Asked Questions WarrantyMinimum System Requirements Package ContentsNote Using a power supply with a different Introduction IntroductionFeatures and Beneﬁts Features and BeneﬁtsHardware Overview ConnectionsPower Receptor LAN Ports Reset ButtonLEDs Power LEDWAN LEDs Status LEDGetting Started Getting StartedUsing the Conﬁguration Menu Using the Conﬁguration MenuWizard HomeHome Wizard Connection Connection Mode Static IP Dynamic IP PPPoE PPTP Connection Backup ofHome WAN Username Password Address InformationAddress Information PPTP DialupPort Options Home WAN Port OptionsWAN Port Select the WAN port that you would like these port options toMethod IntervalPPPoE / PPTP Connection Disconnect AfterDHCP LAN SettingsIP Address Subnet Mask DHCP ServerDHCP Client List View DHCP List Setting Static DHCPLease Time DHCP Client List HelpSetting Static DHCP Home DHCP Setting Static DHCPStatic DHCP Host Name MAC Address Reserved IP AddressLoad Balance Load Balance Enable Load Balance Base on Loading ShareHome Load Balance Load Balance ConﬁgurationAdvanced Host IPHost IP Host IPHost Network binding Strict Binding Loose BindingHost & Group List Host & Group ListStatic Routing Static RoutingStatic Routing Network Address Netmask Gateway Interface Metric Advanced Static RoutingVirtual Server Virtual Server Enable Server Name Private IP Protocol TypeVirtual Server Private Port Range Interface BindingApplications Special Application Conﬁguration Enable NamePublic Port Range Advanced ApplicationsMulti-DMZ EnableSpecial Application List Multi DMZFilters WAN Name PPPoE Sess Private IP LAN Access Group DirectionAccess Filters Access FiltersBlock All Access Block Selected Items Enable Name Protocol Type Port No. RangeSelect One Group No Filtering ICMP FiltersEnable QoS Queuing Method Process TOS Field QoS SetupAdvanced QoS QoS Set Policy Advanced QoS Set PolicyQoS Policy Policy Name Local/Remote Address Protocol TypeAdvanced Nat NAT Routing TCP Timeout UDP Timeout TCP Window Limit TCP MSS LimitNAT Conﬁguration Set NAT Alias NAT Alias Enable Local Lan IP Wan IP Protocol WAN Back NAT Port OptionsPort Range Non-Port Translation Set NAT AliasAdmin ToolsTools Admin This administrator password protects the conﬁguration for thisTime SystemUsing the Conﬁguration Menu NTP ConﬁgurationFirmware System SettingSave Settings To Local Hard Drive Load SettingsEmail Alert Global Settings Notiﬁcation onPassword Tools Email AlertSNMP Recipient Address Send Test E-mailTools SNMP SNMP Simple Network Management ProtocolDDNS Service Server Name User Name Password Verify Password Domain NameAdditional Settings Enable WildcardUPnP Mail ExchangerWAN Port Binding WAN Port BindingMisc Tools MiscExternal Filters Conﬁguration IDENT PortEnable System RestartDNS Loopback Interface BindingStatus Device InfoDevice Information Device InformationLog Settings Using the Conﬁguration MenuStatus Log Log Settings View LogSyslog Delivery Sending Out Keep Sent Messages Syslog ServersLog Priority for Modules Message StatusStats RefreshRefresh Restart CountersInterface Statistics Interface Statistics Load Share Overall StatisticsNAT Status NAT TimeoutsUsing the Conﬁguration Menu NAT StatusTCP Property NAT Trafﬁc Connections Errors Misc NAT Connection ListStatus Statistics NAT Status View Connection List Troubleshooting TroubleshootingResetting the DI-LB604 to Factory Default Settings Technical Speciﬁcations Advanced Firewall FeaturesOperating Temperature Safety and EmissionsPower Input  Ext. Power Supply DC 5V, 3AWeight WarrantyFrequently Asked Questions 1 Why can’t I access the Web-based conﬁguration?How to tell straight-through cable from a crossover cable Page DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual  Click Specify an IP Address Frequently Asked Questions DI-LB604 User’s Manual Click on the DNS Conﬁguration tab  Click OK twice Right-click on My Network Places and select Properties  Highlight Internet Protocol TCP/IP and click Properties2 How can I setup my router to work with a Cable modem connection? DI-LB604 User’s Manual Static Cable Connection 3 How can I setup my router to work with DSL or any PPPoE connection? DI-LB604 User’s Manual 5 How do I open ports on my router? To set up your routerStep 9 Click Apply and then click Continue 7 How do I conﬁgure the DMZ Host? 6 What is DMZ?Demilitarized Zone DI-LB604 User’s Manual 8 How do I open a range of ports on my DI-LB604 using Firewall rules? Step 7 Click Apply and then click Continue10 How do I use PC Anywhere with my DI-LB604 router? 9 What are virtual servers?Enable Server PortDI-LB604 User’s Manual Step 4 The ﬁrst entry will read as shown aboveStep 5 Click Apply and then click Continue Step 6 Create a second entry as shown belowStep 7 Click Apply and then click Continue 11 How can I use eDonkey behind my D-Link Router?Step 2 Click on Advanced and then click Firewall Step 4 Click Apply and then Continue 12 How do I configure my router for KaZaA and Grokster? 13 How do I conﬁgure my router to play Warcraft 3? Step 2 Click on Advanced and then click Virtual Server14 How do I use NetMeeting with my D-Link Router? 15 What is NAT?Conﬁgure the Game Port information on each computer Appendix Securing Your Network1. Change Admin Password 2. Change your SSID 3. Enable WEP and WPAGlossary AppendixCarrier Sense Multiple Access/Collision Detect - CSMA/CD Carrier Sense Multiple Access/Collision Avoidance - CSMA/CAAppendix Appendix Appendix Appendix Megabyte - MB Megabits per second - MbpsAppendix Appendix Appendix Virtual LANContacting Technical Support Tech Support for customers within the United StatesD-Link Technical Support over the Telephone 877 Tech Support for customers within CanadaWarranty Getting StartedWarranty Warranty · Reorient or relocate the receiving antennaFCC Caution WarrantyIMPORTANT NOTE FCC Radiation Exposure Statement Registration Registration