Manuals / D-Link / Computer Equipment / Network Router

D-Link DI-LB604 manual How do I open ports on my router?, To set up your router

Models: DI-LB604

1 92

Download 92 pages 42.25 Kb

Page 66

To set up your router:

DI-LB604 User’s Manual	Frequently Asked Questions

4 Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus?

In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact AOL if you are not sure.

To set up your router:

Step 1: Log into the web-based conﬁguration (192.168.0.1) and conﬁgure the WAN side to use PPPoE.

Step 2: Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box.

Step 3: You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400.

Step 4: Apply settings.

Step 5: Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1 to 2 minutes to connect.

If you connect to the Internet with a different internet service provider and want to use the AOL software, you can do that without conﬁguring the router’s ﬁrewall settings.You need to conﬁgure the AOL software to connect using TCP/IP.

Go to http://www.aol.com for more speciﬁc conﬁguration information of their software.

5 How do I open ports on my router?

To allow trafﬁc from the internet to enter your local network, you will need to open up ports or the router will block the request.

Step 1: Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default).

Step 2: Click on Advanced on top and then click Virtual Server on the left side.

D-Link Systems, Inc.

66

Image 66

D-Link DI-LB604 manual How do I open ports on my router?, To set up your router

Contents

Page Package Contents Table of ContentsSetting Static DHCP Features and BeneﬁtsFrequently Asked Questions Log SettingsTroubleshooting WarrantyPackage Contents Minimum System RequirementsNote Using a power supply with a different Introduction IntroductionFeatures and Beneﬁts Features and BeneﬁtsPower Receptor LAN Ports Hardware OverviewConnections Reset ButtonWAN LEDs LEDsPower LED Status LEDGetting Started Getting StartedUsing the Conﬁguration Menu Using the Conﬁguration MenuHome WizardHome Wizard Connection Mode Static IP Dynamic IP PPPoE PPTP Connection Backup of ConnectionHome WAN Address Information Username PasswordAddress Information PPTP DialupWAN Port Port OptionsHome WAN Port Options Select the WAN port that you would like these port options toPPPoE / PPTP Connection MethodInterval Disconnect AfterIP Address Subnet Mask DHCPLAN Settings DHCP ServerLease Time DHCP Client ListView DHCP List Setting Static DHCP DHCP Client List HelpStatic DHCP Setting Static DHCPHome DHCP Setting Static DHCP Host Name MAC Address Reserved IP AddressHome Load Balance Load BalanceLoad Balance Enable Load Balance Base on Loading Share Load Balance ConﬁgurationHost IP AdvancedHost IP Host IPHost & Group List Host Network bindingStrict Binding Loose Binding Host & Group ListStatic Routing Network Address Netmask Gateway Interface Metric Static RoutingStatic Routing Advanced Static RoutingVirtual Server Virtual ServerVirtual Server Enable Server Name Private IP Protocol Type Private Port Range Interface BindingPublic Port Range ApplicationsSpecial Application Conﬁguration Enable Name Advanced ApplicationsSpecial Application List Multi-DMZEnable Multi DMZAccess Filters FiltersWAN Name PPPoE Sess Private IP LAN Access Group Direction Access FiltersSelect One Group No Filtering Block All Access Block Selected ItemsEnable Name Protocol Type Port No. Range ICMP FiltersQoS Setup Enable QoS Queuing Method Process TOS FieldAdvanced QoS QoS Policy QoS Set PolicyAdvanced QoS Set Policy Policy Name Local/Remote Address Protocol TypeNAT Routing TCP Timeout UDP Timeout TCP Window Limit TCP MSS Limit Advanced NatNAT Conﬁguration Port Range Non-Port Translation Set NAT Alias NAT Alias Enable Local Lan IP Wan IP Protocol WAN BackNAT Port Options Set NAT AliasTools Admin AdminTools This administrator password protects the conﬁguration for thisUsing the Conﬁguration Menu TimeSystem NTP ConﬁgurationSave Settings To Local Hard Drive FirmwareSystem Setting Load SettingsPassword Email AlertGlobal Settings Notiﬁcation on Tools Email AlertTools SNMP SNMPRecipient Address Send Test E-mail SNMP Simple Network Management ProtocolAdditional Settings DDNSService Server Name User Name Password Verify Password Domain Name Enable WildcardWAN Port Binding UPnPMail Exchanger WAN Port BindingExternal Filters Conﬁguration MiscTools Misc IDENT PortDNS Loopback EnableSystem Restart Interface BindingDevice Information StatusDevice Info Device InformationStatus Log Log Settings Log SettingsUsing the Conﬁguration Menu View LogLog Priority for Modules Syslog DeliverySending Out Keep Sent Messages Syslog Servers Message StatusRefresh StatsRefresh Restart CountersInterface Statistics Interface Statistics Load Share Overall StatisticsUsing the Conﬁguration Menu NAT StatusNAT Timeouts NAT StatusNAT Connection List TCP Property NAT Trafﬁc Connections Errors MiscStatus Statistics NAT Status View Connection List Troubleshooting TroubleshootingResetting the DI-LB604 to Factory Default Settings Operating Temperature Technical SpeciﬁcationsAdvanced Firewall Features Safety and EmissionsWeight Power Input Ext. Power Supply DC 5V, 3A WarrantyFrequently Asked Questions 1 Why can’t I access the Web-based conﬁguration?How to tell straight-through cable from a crossover cable Page DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual  Click Specify an IP Address  Click on the DNS Conﬁguration tab Frequently Asked QuestionsDI-LB604 User’s Manual  Click OK twice Right-click on My Network Places and select Properties  Highlight Internet Protocol TCP/IP and click Properties2 How can I setup my router to work with a Cable modem connection? DI-LB604 User’s Manual Static Cable Connection 3 How can I setup my router to work with DSL or any PPPoE connection? DI-LB604 User’s Manual 5 How do I open ports on my router? To set up your routerStep 9 Click Apply and then click Continue 6 What is DMZ? 7 How do I conﬁgure the DMZ Host?Demilitarized Zone DI-LB604 User’s Manual 8 How do I open a range of ports on my DI-LB604 using Firewall rules? Step 7 Click Apply and then click ContinueEnable 10 How do I use PC Anywhere with my DI-LB604 router?9 What are virtual servers? Server PortStep 5 Click Apply and then click Continue DI-LB604 User’s ManualStep 4 The ﬁrst entry will read as shown above Step 6 Create a second entry as shown below11 How can I use eDonkey behind my D-Link Router? Step 7 Click Apply and then click ContinueStep 2 Click on Advanced and then click Firewall Step 4 Click Apply and then Continue 12 How do I configure my router for KaZaA and Grokster? 13 How do I conﬁgure my router to play Warcraft 3? Step 2 Click on Advanced and then click Virtual Server15 What is NAT? 14 How do I use NetMeeting with my D-Link Router?Conﬁgure the Game Port information on each computer 1. Change Admin Password AppendixSecuring Your Network 2. Change your SSID 3. Enable WEP and WPAGlossary AppendixCarrier Sense Multiple Access/Collision Avoidance - CSMA/CA Carrier Sense Multiple Access/Collision Detect - CSMA/CDAppendix Appendix Appendix Appendix Megabyte - MB Megabits per second - MbpsAppendix Appendix Appendix Virtual LAND-Link Technical Support over the Telephone 877 Contacting Technical SupportTech Support for customers within the United States Tech Support for customers within CanadaWarranty Getting StartedWarranty Warranty · Reorient or relocate the receiving antennaWarranty FCC CautionIMPORTANT NOTE FCC Radiation Exposure Statement Registration Registration