Section 3 - Configuration
Internet Setup
PPTP
Choose PPTP
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static
Mask: PPTP only).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
DNS Servers: The DNS server information will be supplied by your ISP (Internet
Service Provider.)
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
Account: Enter your PPTP account (username).
Password: Enter your PPTP password and then retype the password in the next box.
Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintained during inactivity. To disable this feature, enable Auto-
reconnect.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.
Connect Mode: Select either
18 |