Section 3 - Configuration

Administrator Settings

This page will allow you to change the Administrator and User names and passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords.

Admin Password:

User Password:

Remote Management:

Remote Admin IP:

Port:

Enter a new login name and a new password for the administrator login. Only the administrator can make changes to the settings.

Enter a new login name and a new password for the user login. If you login as user, you will only be able to see the settings and not be able to make changes.

Remote management allows the DIR-615 to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host.

Enter the IP address of the remote computer.You may enter

*to allow a connection from any internet address.

The port number used to access the DIR-615.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-615 and 8080 is the port used for the Web Management interface.

D-Link DIR-615 User Manual

35