Section 3 - Configuration
Wireless SettingsEnable Wireless:
Wireless Network Name:
Wireless Channel:
Enable Auto Channel Scan:
802.11 Mode:
Visibility Status:
Wireless Security:
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.
Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case- sensitive.
Indicates the channel setting for the
The Auto Channel Scan setting can be selected to allow the
This feature is enabled by default.
Select one of the following:
802.11g only - Select if all of your wireless clients are 802.11g.
Mixed 802.11b/g - Select if you are using both 802.11b and 802.11g wireless clients. 802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11b/g/n - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the router. If Invisible is selected the SSID will not be seen by site survey utilities so your wireless clients must have the SSID manually entered to connect to the router.
Refer to page 47 for more information regarding wireless security.
22 |