Section 4 - Security

Configure WPA-Personal (PSK)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

1.Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side.

2.Next to Security Mode, select WPA-Personal.

3.Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2.

4.Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase in ASCII format at both ends of the wireless connection.The pass-phrase must be between 8-63 characters.

5.Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose

connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.

D-Link DIR-615 User Manual

53