Section 3 - Configuration
Port ForwardingThis will allow you to open a single port or a range of ports.
Name: Enter a name for the rule or select an application from the
IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name”
Start Port/End Enter the port or ports that you want to open. You Port: can enter a single port or a range of ports. Seperate
ports with a common.
Example:
Traffic Type: Select the type of protocol you would like to assign to the rule.
Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.
28 |