D-Link DIR-657 manual Network Filters, MAC Address Dhcp Client Clear

Section 3 - Configuration

Network Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.

Configure MAC Filtering:

MAC Address:

DHCP Client:

Clear:

Select Turn MAC Filtering Off, Turn MAC Filtering ON and ALLOW computers listed to access the network, or

Turn MAC Filtering ON and DENY computers listed to access the network from the drop-down menu.

Enter the MAC address you would like to filter.

To find the MAC address on a computer, please refer to the Networking Basics section in this manual.

Select a DHCP client from the drop-down menu and click << to copy that MAC Address.

Click to remove the MAC address.

D-Link DIR-657 User Manual 51