Section 4 - Security

Configure WPA-Enterprise (RADIUS)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

1.Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side.

2.Next to Security Mode, select WPA-Enterprise.

3.Next to WPA Mode, select Auto, WPA2 Only, orWPA Only. Use Auto if you have wireless clients using both WPA and WPA2.

4.Next to Cypher Type, select TKIP and AES, TKIP, or AES.

5.Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default).

6.Next to Authentication Timeout, enter the amount of time before a client is required to re-authenticate (60 minutes is default).

7.Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.

D-Link DIR-825 User Manual

76

Page 80
Image 80
D-Link DIR-825 manual Configure WPA-Enterprise Radius, Next to Security Mode, select WPA-Enterprise