MOUSE
My mouse is not detected during boot up. What can be the cause?
One of the following may be the case:
Please verify that all mouse cables are inserted properly. Check especially for a
Read your motherboard documentation and make sure that the PS/2 mouse IRQ is enabled. (This can be set for most computers in the BIOS setup pages)
The computers boot properly but I cannot use the mouse. What can be the cause?
One of the following may be the case:
Please verify that the mouse is plugged into the
Make sure the mouse works properly when plugged into a computer directly. You will need to reboot the system to test this.
Try using a different mouse.
Verify that the mouse complies with the PS/2 standard. A combination mouse will work, but it must be set to PS/2 mode and the correct serial mouse to PS/2 adapter must be used. A serial mouse with a serial - PS/2 adapter will not work, since the mouse signals do not comply with the PS/2 standard.
Make sure that the power adapter is plugged in at both ends and that it is working correctly. Its rating must be 9V 600mA.
13
