Select from the list of NTP (Network Time Protocol) time servers. Then select the time zone that you are in and click on Apply to save.
Remote Log
The Log dialog allows you to view and configure the log. To view the log, click on the View System Log button.
Below is the System Log screen which shows the date/time of the log, the facility that was logged, the severity level and the log message. Click on Refresh to view any new information that is logged.
System Log when log mode is DISABLED 
NOTE: When you click on the View System Log button, the System Log screen that you access will be located under the Status section (see screen on left). To return to the previous screen to configure system log, remember to click on the Tools tab (located on top row) first and then click on Remotelog.
System Log when log mode is ENABLED 
65
