Virtual Server

If you enable NAT (Network Address Translation), you can configure the Virtual Server, Port Triggering, and DMZ Host.

NAT—Virtual Servers Setup

A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on the LAN side.The following figure shows the screen that allows you to configure your virtual server(s). Click on the Add button to configure a virtual server.

Select the virtual server from the drop-down list and complete the server IP address, then click on Apply once.

31

Page 31 Page 33
Page 32
Image 32
D-Link DSL-2640U user manual NAT-Virtual Servers Setup
Page 31 Page 33
Top Page Image Contents