DSL-504G ADSL Router User’s Guide
Static Routing
Use the Static Routing Table to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway. If the
Figure 4-6. Static Routing menu
To add a static route to a specific destination IP address, enter a Destination IP address, Netask, and Gateway IP address. Click Apply to enter the new static route in the table below. The route becomes active immediately upon creation.
Existing static routes cannot be edited. To remove a static route, click on the trashcan icon for the static route. Remember to save the configuration changes.
42
