Polycom Wireless Microphone System Introduction, Checklist of Parts, To Ensure Better Performance

INTRODUCTION

Thank you for selecting the SoundStation Premier, the next generation of full duplex conference phones. It will forever change your expectations regarding voice quality. Its super sensitive hypercardioid microphones allow you to zero in on meeting participants, while its high fidelity neodymium speaker provides both clarity and volume for even the largest conference rooms. But what puts the SoundStation Premier in a class all by itself is its virtually echo-free simultaneous two-way communications. Together with automatic gain control and noise reduction, meeting participants will have a difficult time realizing that they are not on a telephone handset. Furthermore, this product is simple and straightforward to use. The next several pages will explain the product in its entirety. Should you have any questions or comments, please call our technical support line at 1-800-451-0995 or fill out our customer registration card.

CHECKLIST OF PARTS

Your SoundStation audio conferencing system includes the following items:

If any of the above parts is missing, please contact your Polycom representative or your Polycom authorized dealer.

TO ENSURE BETTER PERFORMANCE

▼Locate the SoundStation Premier in a quiet environment, with soft furnishings — such as carpets, curtains, and sound-absorbing walls and ceilings.

▼Place the unit at the center of a table or desk.

▼Keep papers and other objects away from the unit.

▼Seat all participants the same distance from the SoundStation Premier console.

▼Speak at normal conversation levels.

▼Direct your voice toward the SoundStation Premier console.

▼Do not move the SoundStation Premier console during a call.

INSTALLING THE CONFERENCE PHONE

1.Plug the long SoundStation cable from the Wall Module into the slot under the SoundStation Premier console as illustrated below.

2.Thread the cable through the channels on the underside of the SoundStation Premier console, as shown below.

3.Insert the Wall Module plug into a nearby electrical outlet.

The SoundStation Premier console will run a brief self-test, and then you’ll hear a tone. If you don’t hear the tone, make sure the outlet is working and the power is switched on.

4.Plug the short cable from the Wall Module into a modular wall jack for a standard analog phone line. Your telephone system administrator or service technician can help you identify a standard analog phone line. A standard analog line supports fax machines, answering machines, modems, and most single-line telephones.

SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide