LAVALIER WIRELESS TRANSMITTER | SPECIFICATIONS |
Transmitter Operation
Slide the transmitter’s battery cover open and place the included 9V battery into the Battery Compartment (4), observing the correct polarity. Turn on the transmitter by pushing the Transmitter ON/OFF Switch (2) to the ON position. The “Low Battery” LED (3) will give a single quick flash. In the case of a dead or low battery, the LED will not go on at all or will stay on continuously, indicating a battery voltage below 7 V. If this occurs, replace with a fresh 9V battery. To preserve battery strength, turn the transmitter off when not in use.
With the transmitter ON/OFF Switch (2) switched to ON, clip the transmitter to a belt or place in a pocket. Attach the Microphone (5) at chest level. Do not place too close to mouth — a distance of six inches works best. When ready to speak, turn on the microphone by pushing the Audio ON/OFF Switch (1) to the ON position.
(1) Audio On/Off Switch
(2) Transmitter On/Off Switch
(3) Low Battery LED
(5) Microphone
(4)Battery Compartment (on the bottom)
Chapter 4
SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide | SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide |
