D-Link DVG-5112S Enable, Enable, 3986):, Header:, Built-in, P-Assert:, User Name:, From-Header, INVITE With, Support URI, Privacy Type:, Compact Form:, Display Name:

DVG-5112S User’s Manual

VoIP Calling Notification: The gateway will play a tone to notify that the call is via VoIP.

Enable Built-in Call Hold Music: The default setting is that when receiving a call hold request, the gateway will play music on hold. Untick the check box to disable this function while necessary.

Enable P-Assert:This variable is for caller ID protection.

Privacy Type: Privacy type is used to disguise the caller ID when queried via an ITSP/Third-Party Assertion.

Invite URL need ‘user=phone’: There is ‘user=phone’ in invite packet.

Reliability of Provisional Responses: Provide information on the progress of the request processing if selected.

Compact Form: It decreases the size of SIP header if selected.

SIP CallerId Obtaining: Defines from which part of the SIP packet will the gateway obtain caller ID. There are several places where you can put your caller ID.

Remote-Party-Id Display Name: It is locate at SIP→Remote-Party-ID→Before [<sip:]

Remote-Party-Id User Name: It is locate at SIP → Remote-Party-ID → After [<sip:], Before [@]

From-Header Display Name: The standard way is in SIP → Message Header → From → SIP Display info.

Put Caller ID In URI: There is caller ID in URI if selected.

INVITE With Remote-Party-ID Header: There is Remote-Party-ID in the header if selected.

Support URI Percent-Encoding(RFC 3986): It follows RFC 3986 to encode/decode the letters of the basic Latin alphabet, digits, and a few special characters.

Enable SIP ‘Allow’ Header: The system will put ‘Allow’ in the sip header if selected.

D-Link Systems, Inc. 23