DVG-5112S in a NAT network
Under this mode, the gateway uses a virtual IP address and the IP sharing function of other systems to connect to the Internet.
| Please avoid IP addresses in the following range: | |||
LAN IP address for IP sharing | ||||
| IP sharing or change SIP series gateway LAN Port IP addressing) | |||
Set as static IP address, and assign the LAN IP address of the IP | ||||
sharing to the Default Gateway. | ||||
| ||||
|
|
|
| |
|
| If the WAN of the IP sharing device has a static IP address, | ||
|
| then the NAT IP address is set as the Public IP address for | ||
NAT /STUN Settings | Enable | IP sharing. |
| |
|
| |||
(Please refer to page 14 for | If the WAN of the IP sharing device uses a dynamic IP | |||
| ||||
information on using NAT.) |
| address, then the gateway has to comply with the DDNS | ||
|
| settings. When using NAT, you must enter the URL | ||
|
| (Uniform Resource Locator) that is registered to the DDNS | ||
|
| server. |
| |
| The WAN of the IP |
| ||
DDNS Settings | sharing device has a | Disabled | ||
static IP address. |
| |||
(Please refer to page 14 for |
|
|
| |
The WAN of the IP | Enabled: enter the registered URL (Uniform | |||
information on DDNS settings.) | ||||
| sharing device has a | Resource Locator) into the network settings | ||
| dynamic IP address. | under NAT | ||
|
|
|
| |
Router/
IP Sharing
VSP
Leased Line/ ADSL
/Cable Modem
8 |