DVG-5112S User’s Manual

3-22 DTMF & Pulse

Dial Wait Timeout: Use this variable to set the wait time for the user’s first key pressing when dialing a number. The user will hear a busy tone if he or she does not press the first key within the set time frame.

Inter Digits Timeout: Set the waiting time between each key press. The numbers input up to that point will be dialed after the timeout.

Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones): Used to set the dial tone when a call is being diverted to another extension.

DTMF Detection Sensitivity: Used to adjust the sensitivity of the telephone keys.

Enable Out-of-Band DTMF: To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via SIP Info.

NOTE: Out-of-Band DTMF transport method may vary with different VoIP networks, please contact your VoIP provider for their preferred method.

Payload Type: payload type of RFC2833.

Volume: Defines the volume of RFC2833.

Enable Hook Flash Event: To send Hook Flash event when enabled Out-of-Band DTMF.

Disable: Not to send Hook Flash event.

Auto: To send Hook Flash event followed the type of Out-of-Band DTMF.

SIP_INFO: To send Hook Flash event by SIP_INFO even Out-of-Band DTMF is RFC 2833.

RFC_2833: To send Hook Flash event by RFC 2833.

D-Link Systems, Inc.

39