DVG-5112S User’s Manual

1-2 Hardware Connections and Description

Front Panel

Power/Alarm Indicator: Green light indicates a normal power supply. Red light indicates when performing a self-test/booting up or the DVG-5112S’s abnormal operation.

VoIP Indicator: Blinking green light indicates normal operation. It will light on green when DVG-5112S is registered with the service provider.

Phone1/Phone2 Indicator: Phone LED should be in orange while Phone in use.

Note: When starting up DVG-5112S, the Alarm and VoIP will light up. After about 40 seconds, the VoIP indicator will blink in green. If the Alarm indicator continues to blink, it means DVG-5112S is currently communicating with ISP and has yet to obtain an IP address or fail to register to VoIP Service Provider.

Left Side

RST

RST: Use to Restore to factory default: (IP address, Administrator's Name and Password)

(1)Disconnect the power plug.

(2)Press and hold the reset button for 6 seconds.

(3)Reconnect the power plug while pressing down on the reset button.

(4)Release the reset button after 6 seconds. Factory settings will be restored.

D-Link Systems, Inc.

5