Section 4 - Wireless Security

Configure WEP

Using the D-Link Wireless Connection Manager

It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.

1.Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. From the list of available wireless networks, select the network you want to connect to can click Connect. If the network is using WEP, the screen (as shown to the right) will appear.

2.Enter the WEP key exactly as it is on your wireless router or access point.

3.Click the Show text in the password field box to see the WEP key. Unchecking it will hide the key.

4.Click OK to connect to the network. Allow up to 30 seconds to connect.

If you would like to create a new network and enter the WEP settings, refer to the next page.

D-Link DWA-643 User Manual

27

Page 27
Image 27
D-Link DWA-643 manual Configure WEP, Using the D-Link Wireless Connection Manager