Getting Started (continued)

Setting up a Wireless Infrastructure Network

Please remember that D-Link Air together, right out of

wireless devices are pre-configured to connect the box, with their default settings.

For a typical wireless setup at home (as shown above), please do the following:

You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office)

Consult with your Cable or DSL provider for proper installation of the modem

Connect the Cable or DSL modem to your broadband router (see the Quick

Installation Guide included with your router.)

Install the D-Link Air DWL-510 wireless PCI adapter into an available PCI slot on your desktop computer.

(See the Quick Installation Guide included with the DWL-510.)

Install the D-Link Air DWL-610 wireless Cardbus adapter into a laptop computer.

(See the Quick Installation Guide included with the DWL-610.)

If you wish, you may connect a computer that is equipped with an Ethernet network adapter (such as a DFE-530TX+) to the router also.

9

Page 9
Image 9
D-Link DWL-610 manual Getting Started