33
Troubleshooting
2. What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want.
However, the positioning of the products within your environment will affect the
wireless range. Please refer to Installation Considerations in the Wireless
Basics section of this manual for further information about the most advanta-
geous placement of your D-Link wireless products.
3. Why does my wireless connection keep dropping?
4. Why can’t I get a wireless connection?
If you have enabled Encryption on the DWL-AB520, you must also enable en-
cryption on all wireless devices in the network in order to establish a wireless
connection.
Antenna Orientation- Try different antenna orientations for the DWL-
AB520. Try to keep the antenna at least 6 inches away from the wall
or other objects.
If you are using 2.4GHz cordless phones, X-10 equipment or other home
security systems, ceiling fans, and lights, your wireless connection will
degrade dramatically or drop altogether. Try changing the Channel on
your Router, Access Point and Wireless adapter to a different Channel
to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that
generate RF noise, like microwaves, Monitors, electric motors, etc.
For 802.11a, the Encryption settings are: 64, 128 or 152 bit. Make sure
that the encryption bit level is the same on the Router (if you have an
infrastructure network) and the DWL-AB520.
For 802.11b, the Encryption settings are: 64, 128, or 256 bit. Make sure
that the encryption bit level is the same on the Router and the DWL-
AB520.
Make sure that the SSID on the Router (if you have one in your network)
and the DWL-AB520 are exactly the same. If they are not, wireless
connection will not be established. Please note that there are two sepa-
rate SSIDs for 802.11a and 802.11b. The default SSID for both 802.11a
and 802.11b is default.