D-Link hd wireless n cube network camera Zero Configuration Setup, Connect the Ethernet Cable

Section 2: Installation

Zero Configuration Setup

If you have a D-Link Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router.

Connect your camera to your mydlink enabled cloud router and Zero Configuration will automatically configure your DCS‑2132L and automatically add the camera to your mydlink account. You can now remotely access your camera from the mydlink.com website to manage and monitor your DCS-2132L.

Attach the External Power Supply

Attach the external power supply to the DC Power receptor located on the rear panel of the DCS-2132L and connect it to your wall outlet or power strip.

Connect the Ethernet Cable

If using an Ethernet connection: Connect the included Ethernet cable to the

Ethernet port located on the back of the DCS-2132L and connect it to your router.

D-Link DCS-2132L User Manual 12