D-Link hd wireless n cube network camera user manual Advanced, Digital Input/Output

Section 4: Configuration

Advanced

Digital Input/Output

This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. After making any changes, click the Save Settings button to save your changes.

Select D/I or D/O Mode:

LED:

The camera will send a signal when an event is triggered, depending upon the type of device connected to the DI circuit.

N.C. stands for Normally Closed. This means that the normal state of the circuit is closed. Therefore events are triggered when the device status changes to "Open."

N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed."

You may specify whether or not to illuminate the status LED on the camera.

D-Link DCS-2132L User Manual 67