Hardware Description

Rear Panel

LANWAN

Reset

Power

Reset Used to restore the VDI-604 back to factory default settings.

LAN LAN port sockets (CAT5 Ethernet RJ-45 cable). The LED PORTS* glows steadily when a port is connected to a hub, switch or

1-4network-adapter-equipped computer in your local area network (LAN.)

WAN* WAN port socket (CAT5 Ethernet RJ-45 cable). This is where you will connect to your high speed Internet access

Power Connect one end of your included power adapter to the power port and the other end into your power outlet.

*All ports (both LAN & WAN) are Auto-MDIX. All ports auto-sense cable types to accommodate Straight-through or Cross-over cable.

Reset

To reset the system settings to factory defaults, please follow these steps:

1.Leave the device powered on, do not disconnect the power

2.Press the reset button and hold (use a paper-clip)

3.Keep the button pressed about 10 seconds

4.Release the button

The VDI-604 will then automatically reboot itself.

-9-

Page 9
Image 9
D-Link VDI-604 manual Reset Power