D-Link WAP54G manual Setting up the Wireless-G Access Point

Instant Wireless® Series

D.Connect the AC power adapter to the Access Point’s Power port. Only use the power adapter supplied with the Access Point. Use of a different adapter may result in product damage.

D

Proceed to “Step 2: Setting up the Wireless-G Access Point.”

Note: In order for all other wireless devices to communicate with the Access Point, those devices must be operating in infrastructure mode. If any wireless devices are configured in ad-hoc mode, they WILL NOT be recognized by the Access Point.

Wireless-G Access Point

Step 2: Setting up the Wireless-G Access Point

Now that you’ve connected the Access Point to your wired network, you are ready to begin setting it up. The Setup Wizard will take you through all the steps necessary to get the Access Point connecting your wireless network to your wired network and communicating more efficiently.

A.Insert the Setup Wizard CD into your PC’s CD-ROM drive. Optimally, your PC should be on your wired network.

B.The Welcome screen should appear on your monitor. If it does not, this means the autorun is not functioning. Start the autorun manually by clicking the Start button, selecting Run, and typing D:\setup.exe (if “D” is your PC’s CD-ROM drive). Then click the Setup button.

B

4 5