![](/images/new-backgrounds/1122375/122375103x1.webp)
Instant Wireless® Series
Note: In Wireless Bridge mode, the Access Point can ONLY be accessed by another access point in Wireless Bridge mode. In order for your other wireless devices to access the Access Point, you must reset it to Access Point mode. The two modes are mutually exclusive.
Figure
The Status Tab
The Status tab, shown in Figure
Figure
•Firmware Version. The current version of the Access Point’s firmware is displayed. Firmware should only be upgraded from the Help tab if you experience problems with the Access Point.
•AP Name. This displays the name you assigned to the Access Point.
20 | 21 |