Manuals / D-Link / Computer Equipment / Network Router

D-Link WAP54G manual Instant Wireless Series

Models: WAP54G

1 67
Download 67 pages 14.7 Kb
Page 48
Image 48

Instant Wireless® Series

9.The second Security Settings screen, shown in Figure 5-8, shows the WEP key. If you entered a passphrase, then the Key 1 field will display the auto- matically generated WEP key. If you did not enter a passphrase, then enter a WEP key in the Key 1 field. Each point in your wireless network must use the same WEP key for the network to function properly. Click the Next but- ton to continue or Back to return to the previous page.

Figure 5-8

•Key 1. WEP keys enable you to create an encryption scheme for wire- less networks. If the WEP key hasn’t been automatically generated, then manually enter a set of values. (Do not leave the field blank, and do not enter all zeroes. These are not valid key values.) If you are using 64-bit WEP encryption, then each key must consist of exactly 10 hexadecimal characters in length. If you are using 128-bit WEP encryption, then each key must consist of exactly 26 hexadecimal characters in length. Valid hexadecimal characters are “0”-“9” and “A”-“F”.

Note: WEP encryption should be used whenever communicating over a wireless network. Wireless transmissions, by their very nature, are unprotected and WEP encryption helps to close this hole in security and make your wireless network safer to use.

Wireless-G Access Point

10.The next screen (Figure 5-9) will allow you to review your settings. If these settings are correct, click the Yes button to save these settings. If there are any problems with the settings, click the No button to exit the Setup Wizard.

Figure 5-9

11.At this point, the configuration performed with the Setup Wizard is com- plete, as shown in Figure 5-10. To configure any other access points in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup Wizard.

Figure 5-10

12

13

Page 47 Page 49
Page 48
Image 48
D-Link WAP54G manual Instant Wireless Series
Page 47 Page 49

WAP54G specifications

The D-Link WAP54G is a wireless access point that offers a variety of features aimed at enhancing network connectivity and performance. Designed for small to medium-sized environments, this device is an essential component for creating a reliable wireless network. With its impressive capabilities, the WAP54G easily integrates into existing networks, providing enhanced coverage and flexibility.

One of the main features of the WAP54G is its support for the IEEE 802.11g standard, which allows for data transfer rates of up to 54 Mbps. This standard is backward compatible with 802.11b devices, ensuring that users can maintain connectivity with older hardware. This level of compatibility makes the WAP54G a versatile choice for diverse networking needs.

The device is equipped with advanced security features, including WPA and WPA2 encryption protocols, ensuring that users can protect their network from unauthorized access. These security measures are essential in today’s world, where data breaches are increasingly common. Additionally, the WAP54G supports MAC address filtering, which further restricts access to only authorized devices.

For connectivity, the WAP54G includes multiple Ethernet ports, allowing it to be connected directly to a wired network. This feature enables the access point to bridge the gap between wired and wireless devices, facilitating seamless communication. Moreover, the WAP54G supports Power over Ethernet (PoE), which simplifies installation by allowing it to receive power and data through a single Ethernet cable. This is particularly beneficial in environments where power outlets are limited or difficult to access.

Another noteworthy aspect of the WAP54G is its coverage capabilities. With its adjustable antennas, users can optimize signal distribution throughout a building, overcoming common obstacles such as walls and furniture that can hinder wireless performance. The access point also boasts a user-friendly web-based interface, making it easy to configure and manage settings for both novice and experienced users alike.

In terms of reliability, the D-Link WAP54G features a solid build quality and a compact design, allowing it to fit seamlessly into various environments. The device is also equipped with LED indicators that provide real-time status updates on power, Ethernet connection, and wireless activity, enabling users to monitor their network easily.

Overall, the D-Link WAP54G is a robust wireless access point that combines speed, security, and flexibility, making it an excellent choice for enhancing network performance in both home and office settings.