Instant Wireless® Series
H.The Security screen will appear. Set the Wired Equivalent
Privacy (WEP) encryption for your wireless network.
Select a WEP c o n f i g u r a t i o n
method and a passphrase. Then click the Next button.
H
I.The second Security screen shows the WEP key. If you entered a pass- phrase, then the Key
1 field will display the automatically generated WEP key. If you did not enter a passphrase, then
enter a WEP key in
the Key 1 field. I Each point in your
wireless network must use the same WEP key for the network to function properly. Click the Next button.
J.The next screen will allow you to review your settings. If
these settings are correct, click the Yes button to save these settings. If
there are any problems with the settings, click the No button to exit the Setup Wizard.
J
K. At this point, the c o n f i g u r a t i o n performed with the Setup Wizard is
complete. To configure any other access points in your network, you can run this Setup Wizard again. Click the Exit button to
exit the Setup
Wizard.K
Congratulations! The installation of the
complete.
8 | 9 |
