Operating Your Dishwasher
Starting Your Dishwasher
IMPORTANT: See the Getting to Know Your Dishwasher section for a description of the various wash settings.
START |
|
|
|
| NORMAL |
| HEAVY |
| CRYSTAL |
| RINSE |
| DELAY |
| SANI |
| CANCEL |
| SECURE |
STOP |
|
|
|
|
|
|
|
|
| RINSE |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SANITIZED WASHING
RINSE AID | RINSING |
FLOOR GUARD | DRYING |
DIAGNOSTIC CLEAN
To wash or rinse the dishes:
1.Press one of the wash cycle buttons or the rinse button on the control panel:
2.Press START/STOP. The numeric display will show the length of the cycle in minutes.
3.Close the door.
START
STOP
4.Push on the door handle to make sure that the door is completely shut. After a brief pause, the dishwasher will start.
When the wash or rinse cycle is completed, the dishwasher will make 3 short beeps.
Adding a Dish After You Start
You can add a dish, if needed, after starting your dishwasher. Dacor recommends that you only add items during the first 5 minutes of operation to make sure they get clean.
To add a dish:
1.Open the door. The dishwasher will stop operating.
2.Wait a moment for the steam to clear.
3.Without touching any of the hot surfaces or racks, insert the item into one of the racks, following normal loading instructions.
4.Close the door.
5.Push on the door handle to make sure that the door is completely shut. After a short pause, operation will resume.
Stopping Your Dishwasher During Operation
CANCEL
To stop the current cycle and drain your dishwasher:
1.Open the door. The dishwasher will stop operating.
2.Press CANCEL.
CANCEL
3.Close the door. After a short pause, you will hear the water in the dishwasher begin to drain. Once the water is drained, the dishwasher will stop.
IMPORTANT: If you press the CANCEL button twice, the dishwasher will stop completely. The water inside the dishwasher will not drain.
16 | Dishwasher |
|
|
