Dacor 65537 Parts of the Control Panel, Numeric Display, Control Panel Indicator Lights, Buttons

Getting to Know Your Dishwasher

Parts of the Control Panel

Control Panel Indicator Lights: The lights that show the status of the dishwashing cycle and things that

		may require your attention (see page 20).
Numeric Display:		Displays the approximate number of minutes until the end of the cycle.
		If you are using the delay feature, it shows the number of hours before
		the dishwasher will start.
BUTTONS
		Use this button to start the dishwasher after selecting a wash cycle or
	START
		the rinse cycle (see page 16). It can also be used to pause the
	STOP
		dishwasher in the middle of a wash or rinse cycle (see page 17).
		This wash setting is best for normal soil.
	NORMAL
		This wash setting is best for very dirty tableware and cookware.
	HEAVY
		This wash setting is best for china, crystal, or glass. It is also good for
	CRYSTAL
		lightly soiled items that have been pre-rinsed.
		Press this button if you want to run the rinse portion of the cycle only.
	RINSE
		The dry cycle will not run. Also, use this setting to rinse tableware that
		you do not want to wash right away.
		This feature allows you to set the dishwasher to start at a later time (see
	DELAY
		page 18).
		This feature can be used with the normal wash cycle only. It rinses the
	SANI
		dishware with rinse water that is 5 degrees hotter than the regular cycle
	RINSE
		rinse water for maximum sanitization and drying (see page 17).
		Use this button to stop the dishwasher in the middle of a cycle (see page
	CANCEL
		16).
		A safety feature. This button locks the control panel to prevent children
	SECURE
		from tampering with it (see page 19).

Numeric Display

START	NORMAL	HEAVY	CRYSTAL	RINSE	DELAY	SANI	CANCEL	SECURE
STOP						RINSE

SANITIZED WASHING

RINSE AID	RINSING
FLOOR GUARD	DRYING

DIAGNOSTIC CLEAN

Control Panel

Indicator Lights

8 Dishwasher