Dacor DDWF24S Starting Your Dishwasher, Standby Mode, Stopping Your Dishwasher During Operation

Models: DDWF24S

1 24
Download 24 pages 63.88 Kb
Page 12
Image 12
Starting Your Dishwasher

Operating Your Dishwasher

Starting Your Dishwasher

Standby Mode important

If the dishwasher drain line is connected to a garbage disposal, run the disposal before operating the dishwasher for proper drainage.

1.Open the door and push in on the main power switch on the top of the door so that it is in the on position. The control panel on the front of the dishwasher is lit when the switch is on.

2.Close the door. Push in gently on the top of the door until it clicks shut.

3.Push the PROGRAM button repeatedly until the indicator for the desired wash cycle is lit. See the facing page for a description of the various wash cycles.

4.If you want to change the temperature setting, push the TEMPERATURE button repeatedly to toggle between the “normal” setting and the “economy” setting. The temperature setting indicator is lit when the temperature is set to normal. See the facing page for a description of the temperature settings.

5.Push the START/STOP button.

Stopping Your Dishwasher During Operation note

The indicators around the START/STOP button gradually light up as the cycle progresses. When the cycle finishes, all the indicators are lit. They turn off automatically after two hours.

If power to the dishwasher is switched off at the main power switch or there is a power outage before the wash cycle is complete, the selected cycle will continue when the power comes back on. However, if power is interrupted or the door is opened during drying, the cycle will end.

In hard water areas, both the dishes and the machine can develop a white or gray film after a while. This can be removed by replacing the pre-wash detergent with two tablespoons of citric acid.

Standby Mode

Once the cycle is finished, the dishwasher draws a very small amount of power. Open the door and push the main power switch to turn power off completely.

Stopping Your Dishwasher During Operation

Push the START/STOP button for three seconds. The dishwasher will stop operating.

Program button

Normal Wash indicator

Quick Wash indicator

Heavy Wash indicator

Rinse and Hold indicator

Start/Stop

button

Temperature setting indicator

Temperature button

Control Panel on Front of Door

10

Page 12
Image 12
Dacor DDWF24S Starting Your Dishwasher, Standby Mode, Stopping Your Dishwasher During Operation, Operating Your Dishwasher