Care and Cleaning
Cleaning the Spray Arms
The holes and bearings on the spray arms can sometimes become blocked. Clean them as follows to restore proper operation.
1.Open the door and remove the bottom rack.
2.Pull the bottom spray arm straight up to release it.
5.To release the top spray arm, first remove the top rack. Pull the top rack out until it stops. Turn both rack stops outwards on the rack mounting rails (see diagram). Pull the rack toward you to remove it.
Rack stop
3.Remove any deposits using a needle or something similar. The washer arms also have holes underneath.
4.To reinstall, center the base of the spray arm in the hole and push straight down until it clicks into place.
6.Remove the top spray arm in the same way as the bottom arm and clean it. Reinstall the top spray arm the same way as the bottom one.
7.Reinstall the top rack by inserting the rollers on the base of the rack into the slots on the rack mounting rails. Turn both rack stops inward to lock the rack into place.
15
