| Operating Your Dishwasher |
Wash Cycles |
|
|
|
Heavy Wash | Use for heavily soiled dishes like pots, pans, casserole dishes, etc. Additional |
| smaller items may be added after the larger items if there is still space to |
| conserve water and energy. |
|
|
Normal Wash | Use for normally soiled plates, glasses, bowls, serving dishes and lightly |
| soiled pans. This cycle is best for normally soiled mixed loads. |
|
|
Quick Wash | Use for very lightly soiled loads that are washed immediately after use. This |
| cycle can also be used for very lightly soiled glass, coffee cups, china or |
| other delicate items. |
|
|
Rinse and Hold | Use to rinse dishes that you plan to wash later that day or for rinsing the |
| dishes while waiting for the machine to be filled. The temperature setting |
| cannot be changed for this cycle. |
|
|
Water Temperature Table
Wash Cycle | Wash Water Temperature | Wash Water Temperature | |
When Set to “Normal” Setting | When Set to “Economy” Setting | ||
| |||
Heavy Wash | 160°F (70°C) | 130°F (55°C) | |
Normal Wash | 150°F (65°C) | 130°F (55°C) | |
Quick Wash | 140°F (60°C) | 85°F (30°C)* |
* Higher if water supply temperature is above 85°F.
Adding a Dish After You Start
You can add a dish, if needed, after starting your dishwasher. Dacor recommends that you only add items during the first five minutes of operation to make sure they get clean.
To add a dish:
1.Slowly open the door. The dishwasher will stop operating.
2.Wait a moment for the steam to clear.
3.Without touching any of the hot surfaces or racks, insert the item into one of the racks, following the normal loading instructions.
4.Close the door.
5.Push on the door handle to make sure that the door is completely shut. Operation will resume.
Pausing Dishwasher Operation
To temporarily pause dishwasher operation:
•Open the door. The dishwasher stops operating.
To resume the cycle:
•Close the door.
Changing the Wash Cycle After You Start
You can change the cycle and/or temperature selection after you start your dishwasher.
1.Push the START/STOP button for three seconds. The dishwasher will stop operating.
2.Push the PROGRAM button repeatedly to select the new wash cycle (the indicator for the desired wash cycle will light).
3.If you want to change the temperature setting, push the temperature button repeatedly to toggle between the “normal” and “economy” setting. The temperature setting indicator is lit when the temperature is set to normal.
4.Push the START/STOP button.
Saving on Water and Energy Costs
•To save energy, wait to run the wash cycle until the dishwasher is full.
•Use the economy temperature setting.
•If the dishes are only lightly soiled you can run the Quick Wash cycle and reduce the temperature to 85°F (30°C).
11