Dacor IF36LNBOL Custom Panels and Handles - IF36 Series Models Continued, Custom Handles, D C B

Installation Requirements

Custom Panels and Handles - IF36 Series Models (Continued)

Custom Panels Construction Information

See page 9 for overall dimensions.

NOTE: Spacer panels must be at least 1” (2.54 cm) from the top, bottom, and side edges of the backer panel.

3-Piece Grille Overlay Panel Configuration

Top View Side View

Custom Handles

Dacor recommends handles with larger D-style pulls. If using screws with thick heads, they must be countersunk into the panel before installing the handles.

Any handle designed for use with an appliance should produce satisfactory results. Mounting screw length varies with the total thickness of the panels.

IMPORTANT: Dacor does not advise the use of single pull knobs.

D

C

B

A. Offset dimension		1"
			(2.54 cm)
B. 1/4"	(6.25 mm) Backer panel
			A
1 8"	(3.18 mm) Spacer panel
C. /
D. 3/4"	(1.92 cm) Decorative

overlay panel

3-Piece Door Overlay Panel Configuration

	1"
A	(2.54 cm)	B	C D

A. Offset dimension

B. 1/4" (6.25 mm) Backer panel

C. 1/8" (3.18 mm) Spacer panel

D. 3/4" (1.92 cm) Decorative overlay panel

1-Piece Overlay Panel Configuration

In some cases, your cabinet manufacturer may choose to work with one panel routed for the different dimensions. Follow these panel dimensions and placement instructions to be sure that the custom overlay panels will fit properly.

20" Typ.

(50.8 cm)

36" Max. (91.4 cm)

B

Trim frame	A
surrounding door

DoorC

A. Countersunk screw

B.Handle

C.Door panel assembly

10