Installation Requirements
Door Panels and Cabinet Clearance - IF36 Series Models
The custom door panels and adjacent cabinets for models series IF36 must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see Door Swing 90° on the following page.
Door Swing 110°
Actual Size
Refrigerator to
Cabinet Clearance
110˚ Door
Stop Position 
NOTE: For IF36 series models, rout the hinge side of the custom door panels to a radius that is equal to at least half the thickness of the panel if a 130° door swing is desired. See Adjust Doors.
| Refrigerator |
| Side Trim |
| 11/2" |
| (3.8 cm) |
| 11/4" |
| (3.2 cm) |
| 1" |
| (2.5 cm) |
| Cabinetry |
Hinge | 1/4" (6.35 mm) |
1/2" (1.3 cm) | |
| 3/4" (1.9 cm) |
| 1" (2.5 cm) |
1/2"
| (1.3 cm) |
|
| ||
|
|
| 3/4" |
|
|
|
|
| (1.9 cm) |
|
|
|
|
| a | 1" |
|
|
|
|
|
| |
| c |
|
| (2.5 cm) |
|
| Overl |
|
| ||
| Ba | 11/4" |
| ||
| P |
|
| ||
|
|
| P | (3.2 cm) |
|
| ker |
| y |
| 11/2" |
Door |
|
|
| ||
|
| anel | (3.8 cm) | ||
| anel |
| |||
|
|
|
| ||
Spacer Panel
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinet to some degree.
7
