Installation Instructions
Connecting the Gas
Gas Connection - Natural Gas
notes•Units equipped for use with natural gas ship with a regulator assembly with 3/4” pipe attached and an additional 3/4” nipple.
•The regulator assembly is also equipped with a 3/4” to 1/2” reducer on the inlet side.
1.Connect the factory supplied regulator assembly to the gas inlet at the back right bottom corner of the appliance. Make sure the arrow on the regulator points in the direction of the gas flow (towards the grill).
2.Connect a 1/2” nipple to the regulator.
3.Install an approved flexible gas line from the regulator to the gas line shut off valve.
Natural GasConnectionRegulator Assembly 
(included PN 700597NG)
Gas Connection - Whole House LP Gas
1.Connect the factory supplied regulator assembly to the gas inlet at the back right bottom corner of the appliance. Make sure the arrow on the regulator points in the direction of the gas flow (towards the grill).
2.Connect a 1/2” nipple to the regulator.
3.Install an approved flexible gas line from the regulator to the gas line shut off valve.
Whole House LPGas ConnectionRegulator Assembly 
(included PN 700597LP)
1/2” Nipple (not included)
Flexible Gas Line (not included)
Gas Connection - LP Gas Cylinder Hose
1.Connect the supplied 3/4” coupling/nipple to the gas inlet at the back right bottom corner of the appliance.
2.Connect the included LP cylinder hose to the nipple.
3/4” Coupling/Nipple
(included) Connectto Outdoor Grill| LP Regulator and Hose |
|
| Assembly (included) |
|
| PN 72310 for | PN 101578 for |
| OBSB162, OB36, OBS36 | OB52, OBS52 |
14