Product Specifications
Product Dimensions
Product tolerances: ±1/16” (±1.6 mm), unless otherwise stated
A Front of open door
B Front of handle
C Front panel
D Rear of front panel
1” (2.5 cm) Backguard thickness
9” (22.9 cm)
backguard*6” (15.2 cm) 3” (7.6 cm) backguard* backguard*
External handle shown, some models have integral handle
(see inside cover)
Product width:
29 15/16” (76.0 cm)
RR30NI[F]S: |
|
| RR30NS | RR30NIS | |
3/8” (9.5 mm) |
| Dimension | |||
thick top trim |
| RR30NFS | RR30NIFS | ||
|
| ||||
|
| A | 46 1/4” | 46 1/16” | |
RR30N[F]S: | 35” | (117.5 cm) | (117.0 cm) | ||
| |||||
full stainless | (88.9 cm) | C | 25 1/2” | 25 5/16” | |
steel side panels | to | (64.8 cm) | (64.3 cm) | ||
| 37” | D | 23 3/8” | 23 3/16” | |
| (94.0 cm) | ||||
RR30NI[F]S: | (59.4 cm) | (58.9 cm) | |||
|
| ||||
3” (7.6 cm) |
|
|
|
| |
partial stainless |
| Dimension | RR30NS | RR30NIS | |
steel side panels |
| ||||
(removable) |
| B | 27 7/8” | 27 11/16” | |
|
| (70.8 cm) | (70.3 cm) | ||
|
|
|
*See table for compatibility
Available Backguards**
Part Number | Description | Compatibility | |
|
|
| |
ADRB30E03 | 3 Inch | Optional on all models | |
ADRB30E06 | 6 Inch | Standard on models RR30NS, RR30NFS | |
Optional on models RR30NIS, RR30NIFS | |||
|
| ||
ADRB30E09 | 9 Inch | Optional on all models |
**Models RR30NIS and RR30NIFS come equipped from the factory with a flat stainless steel trim piece in place of a backguard. A backguard may be purchased as an optional accessory. Add an additional 1/16 inch to the depth dimensions above when installing a backguard on models RR30NIS and RR30NIFS.
The trim on models RR30NS and RR30NFS are not compatible with a raised vent.
Models RR30NIS and RR30NIFS are compatible with Dacor raised vent models ERV30 and ERV3015. Use only these specified raised vent models.
4