9
User’s Instruction
Changing Channels
You can change channels in three w ays :
1 The CH buttons will take you through all memorized channels,
one by one. The CH b uttons will not access channels that
have not been programmed into the TV’s memory. For more inf ormation
about programming channels into memory, see the section “Programmin-
ing your TV’s Channel Memory” on the pre vious page .
2 The number buttons (0-9) will take you to any channel, even if it has
not been memorized. To change to a channel, enter its number : the
TV will tune to the new channel when you enter the second digit of
the channel.
3 The PREVIOUS button will take you instantly to the last channel you
were watching.
Changing the Volume
1 The change the volume of the TV set, use the VOL buttons on
the remote or on the front panel.
2 To quickly turn off the sound, press the MUTE button on the remote .
The ‘MUTE’ will appear on screen, colored green. To return the
volume to its previous level, press MUTE again.
Changing the TV’s Channel Memory
Your TV’s memory determines the channels that are available using the CH buttons. You can add channels to this
memory or remove them from memory. If a channel is remov ed from memory, you can tune to with the number buttons,
but you cannot tune to it with the CH buttons.
If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there
are two or more channel memorized, then the Add/Delete Channels function will search the memorized channels only.
Adding/Deleting a channel to memory
1 Use the number buttons to tune to the channel.
2 Press the MENU button twice, then “Set-Up” menu will display.
3 Use the CH buttons to select “Add/Delete Channels” , then use the VOL button to enter the “Add/
Delete Channels” process.
4 If the channel is not in memor y, then use the VOL button to add the channel from memory.
5 If the channel is in memory, then use the VOL button to delete the channel from memory.
6 If you are going to delete other channel, then press the CH buttons until desired channel is selected. And
press the VOL button to delete the channel.
7 Wait 10 seconds, or press the MENU button four times to exit.