16
User’s Instruction
Power Restore

User can select the On/Off status when the power cord put into the wall outlet. If user have a cable box with AC outlet,

then user can connect the TV power cord to the AC outlet and control the TV without TV remote control. This function

is rarely used for home use, so special care is needed while using.

1 With TV turned on, press the MENU button until “Special” menu will be displayed.

2 Use the CH buttons select “Power Restore” item.

3 Use the VOL buttons to select “On” or “Off”.

Closed Caption : C1
CC on Mute : C1
Power Restore : OFF
System : AUTO
Select
Special
Adjust Exit
1
Closed Caption : C1
CC on Mute : C1
Power Restore : OFF
System : AUTO
Select
Special
Adjust Exit
2
Closed Caption : C1
CC on Mute : OFF
Power Restore : On
System : AUTO
Select
Special
Adjust Exit

3

System

User can select the AUTO/PAL-M/PAL-N/NTSC color system modes.

If you have no color problem when see the FF mode of VCR or non standard signal, you must choose the NTSC of color

system modes.

1. With the TV turned on, press the MENU button until “Special” menu will be displayued.

2. Use the CH buttons select “system” item.

3. Use the VOL buttons to selcet “AUTO”, “PAL-M”, “PAL- N ” or “NTSC”

Closed Caption : OFF
CC on Mute : OFF
Power Restore : OFF
System : AUTO
Select
Special
Adjust Exit
1
Closed Caption : OFF
CC on Mute : OFF
Power Restore : OFF
System : AUTO
Select
Special
Adjust Exit
2
Closed Caption : OFF
CC on Mute : OFF
Power Restore : ON
System : AUTO
Select
Special
Adjust Exit

3-1

Closed Caption : OFF
CC on Mute : OFF
Power Restore : ON
System : PAL-M
Select
Special
Adjust Exit

3-2

Closed Caption : OFF
CC on Mute : OFF
Power Restore : ON
System : PAL-N
Select
Special
Adjust Exit

3-3

Closed Caption : OFF
CC on Mute : OFF
Power Restore : ON
System : NTSC
Select
Special
Adjust Exit

3-4