Daewoo DTH-14/20V1FSN, Color Television, DTH-14/20V4FSN, DTH-14/20V3FSN Terminal Name Explanation

APPENDIX

IC Description

Remarks

- Only Cn-220

PIN	Terminal	Name					Explanation
31	P70 / INT 0	Sound Input	- 4-bit input / output port.
			- Input or output can be specified for each bit.
32	P71 / INT 1	N.C
			- # 31 : . Only Cn-220, ITT(MSP)
33	P72 / INT 2/	SD In	Low : Front Mask / Mono, High : Back / Stereo.
	TO IN		- Other function
						R	F	R/F	H	L	V
				INT0		E	E	D	E	E	03H
				INT1		E	E	D	E	E	0BH
				INT2		E	E	E	D	D	13H
				INT3		E	E	E	D	D	1BH
			- Interrupt receiver format, vector addresses.
34
	P72 / INT 3 /	Remocon In		P70	INT0input/HOLDrelease input / Nch-
	T0 IN					Tr. output for watchdog timer.
				P71	INT1 input/HOLD release input.
				P72	INT2 input/Timer 0 event input.
				P73	INT3 input (noise rejection filter
						attached) / Timer
				Notice			R:Rising, F:falling, H:H level,
					L : L level, V : Vector, E:Enable, D:Disale.
			- Use only Japan				Model.
			- This port use when is Stand-By status.
35	P00	ST_By LED	- Condition : Input AC Power On.
				- Power off :‘High(DC 5V)’ Output.(Red)
				- Power on :‘Low(DC 0V)’ Output.
36	P01	TV / VIDEO	- TV Mode : ‘High’ Line (Video) Mode :‘Low’.
37	P02	H.Out	- Use to discharge High Voltage when TV set turns off.
38	P03	Sound Reset	- Sound IC Reset : ITT.
39	P04	AKB	- Use when control AKB (High Beam :‘High(5V)’ Output)
40	P05	Audio Mute	- Use only ‘read data’ of ‘LA76814/10.
41	P06	Video White	- Use when TV set turns off.
			- Use when does power off/on.
42	P07	Power	- .Power Off : Output ‘Low(DC 0V)’
			.Power On : Output ‘High(DC 5V)’

Output form and existence of pull-up resistor for every port can be specified for each bit

At port 1, ”Programmable pull-up resistor provided” when specifying either CMOS or N-ch open drain output. Port status in reset.

Terminal	I/O	Pull-up resistor status at selecting pull-up option.
Port 0	I	Pull-up resistor OFF, ON after reset release.
Port 1	I	Programmable pull-up resister OFF.
		45