Setting Up TV Stations
Manual tuning
1.Press the Number buttons(0~9) or the “PR” button to select a program number you want.
2.Locate the selection bar on the Manual tuning at the Install menu.
•Press the “MENU” button to select the Install menu.
•Move the selection bar to the Install menu with “/” but- tons.
•Place the selection bar on Manual Tuning and press the “” button.
3.Execute Manual Tuning.
•First, select PR number you want to store with“/”buttons on the remote control.
•A tuning screen will appear and cursor will move from left to right / from right to left. If you want to stop tuning press the “MENU” button.
•You should press the“OK” button to store program after the color
of system on the OSD turns to white.If you don’t want to store the program, press“/“ button to skip program.
PR
PR
PR
PR
PR
PR
INSTALL
AUTO TUNING
MANUAL TUNING
SETUP
EDIT
POSITION | ACCESS | EXIT |
|
|
|
MANUAL TUNING
PR 1 | PAL / SECAM |
|
|
PR CHANGE | ACCESS |
STORE | EXIT |
Note :
•If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal, it is possible to store the Manual tuning.
•If present channel is SECAM L/L’,TV set search SECAM L/L’. And, if present channel is not SECAM L/L’,TV set search all channels except SECAM L/L’.
•You can change the Programme number in the Edit mode.
28
