Selection of AV and
Multimedia Input Signal
When connecting PC, STB, DVD with Multimedia
1.Pressing the “MULTIMEDIA” button on the remote controller.
• The screen changes as follows:
PC => HDMI => Component => PC | PC |
|
CLOCK | 1 2 : 0 0 |
Component |
| HDMI |
| |
CLOCK | 1 2 : 0 0 |
| CLOCK | 1 2 : 0 0 |
|
|
|
|
|
HDMI & PC mode
1.For optimum picture quality, use 1360(6)x768 computer or set top box output at a 60Hz refresh rate. Using other formats or refresh rates may result in reduced picture quality.
2.If the message‘No signal’appears on the screen, adjust the PC output to a format listed in the Multimedia Input table.
Multimedia Input Format
Resolution | HDMI |
| Component | Standard | |
| 60Hz | o | o | x |
|
640 x 480 | 72Hz | o | o | x |
|
| 75Hz | o | o | x | VESA Standard |
| 60Hz | o | o | x | VESA Standard |
800 x 600 | 72Hz | o | o | x | VESA Standard |
| 75Hz | o | o | x |
|
| 60Hz | o | o | x | VESA Standard |
1024 x 768 | 70Hz | o | o | x | VESA Standard |
| 75Hz | o | o | x | VESA Standard |
1360(6) x 768 | 60Hz | o | o | x |
|
75Hz | o | o | x |
| |
|
| ||||
720 x 480 | 60Hz | o | o | o |
|
720 x 576 | 50Hz | o | o | o |
|
1280 x 720 | 50Hz | o | o | o |
|
60Hz | o | o | o |
| |
|
| ||||
1920 x 1080i | 50Hz | o | x | o |
|
60Hz | o | x | o |
| |
|
| ||||
720 x 480i | 60Hz | x | x | o |
|
720 x 576i | 50Hz | x | x | o |
|
Note :
•1280 x 720 mode is commonly used for Component.
•So if this mode is used at PC mode, the screen can be enlarged.
38
