
Setup menu
Front AV
1Follow steps
2Use […/†] to select ‘Front AV’.
3Use [œ/√] to select the desired Front AV type.
4Press [SETUP] to exit the menu.
Preferences
Television | 4:3 |
Picture Format | Auto |
Digital Audio | Off |
Front AV | œ CVBS √ |
Video Output | Interlace |
Press < > To Change
CVBS : When you select this signal mode, you can use the audio/video cord to connect other equipment.
Front of
Jack Panel of Accessory Component
(VCR, Analog Camcorder, etc.)
Front of
Video Output
Progressive Scan Video provides the highest picture quality with reduced flickering.
RGB : If you connect the
Interlace or Progressive : If you connect the
1 | Press [SETUP]. | SETUP | |
2 | Use [œ/√] to select ‘Preferences‘. | ||
| |||
3 | While ‘Preferences‘ is selected, press [†] to |
| |
| select ‘Video Output‘. |
| |
4 | Use [œ/√] to select the desired Video Output |
| |
| mode. |
| |
5 | Press [SETUP] to exit the menu. |
|
Preferences
Television | 4:3 |
Picture Format | Auto |
Digital Audio | Off |
Front AV | CVBS |
Video Output | œ Interlace √ |
Press < > To Change
Caution
•Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. Press [P.SCAN] to return to Interlace Scan mode.
31