OPERATION
CONNECTING THE AC CORD
The outdoor unit is connected to the indoor unit through the AC connecting wire or connection cord. To connect the indoor unit to AC, follow the procedures below:
1.Insert the attached AC plug into a
220V~240V AC outlet. | AC Outlet |
| and Plug |
Plug into Only 220V or 220V~240V AC Outlet.
NOTES:
•Never connect the AC line cord plug to other than the speci- fied voltage (Only 220V or 220V~240V).
•Use the attached power cord only.
•If the outlet is a
•The new air conditioner system should be on it’s own 220V circuit. Contact your local electrical installer for installation.
INFORMATION:
1.The plug shall be connected to a ground socket outlet, and the interconnection cord shall be connected by an authorized electrician or specialist.
2. Information for interconnection cable: | Items | Specifications |
| ||
|
|
|
| Under 12K class | AC 250V, 16A, |
|
|
|
| Above 12K class | AC 250V, 16A, |
3. Contact service man for the installation shall be in accordance with national wiring regulation
HOW TO INSTALL BATTERIES
To install the batteries, follow the procedures below:
1. Slide down the cover to access most of the remote buttons. Slide down further to access the battery compartment.
2.Insert two “AAA” size Alkaline batteries following the polarity diagram below.
TIMER |
|
ON/OFF ENTER/ | TURBO/MILD |
CANCEL |
|
+ | – |
– | + |
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3.Do not mix different types of batteries together (e.g. Alkaline and
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from pos- sible battery leakage.
5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manu- facturer’s directions).
5
