TO OPERATE ONLY FAN
To operate only the fan so the unit will circulate the air, proceed as follows:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
2.Press the MODE button until the Fan indicator
appears 
in the display. No allowance setting temperature
3.To select a fan speed, press the FAN SPEED button until the desired speed appears in the display (see below).
FAN SPEEDS
“” The fan will operate on low speed.
“” The fan will operate on medium speed.
“” The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the
speeds simulating a breeze.
NOTE:
•If “NATURAL” is selected, the NATURAL” indicator on the indoor unit will light.
TO SET UNIT TO DEHUMIDIFIER MODE
Select this mode when there is high humidity. To select, follow the procedures below.
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
2.Press the MODE button until the Dehumidifier indica-
tor 
appears in the display.
3.Using the TEMP. ▼ or ▲ buttons, set the desired tem- perature. The desired temperature can be changed up to 32°C and down to 18°C.
8
